TBProAudio TBPAClip

削波器插件TBProAudio TBPAClip
VST插件格式：
VST/VST3/AAX/CLAP

TBPAClip削波/饱和二合一插件，单段/多段可选，软饱和至硬墙限幅灵活可调。削波前设饱和级暖化音色，支持正负独立双削波、随机削波、6种削波/饱和类型、x256过采样抗混叠，附EBU R128响度测量，总线塑形利器。

翻译：
TBPAClip—–削波器和饱和器插件
TBPAClip 是一款 DAW 插件，可对削波过程进行全面而灵活的控制。削波方式可轻松调节，例如柔和饱和或硬限制的砖墙效果。
此外，TBPAClip 还在削波阶段之前提供了一个饱和器，用于温暖音频素材。

TBPAClip 是一款 DAW 插件，可对削波过程进行全面而灵活的控制。削波方式可轻松调节，例如柔和饱和或硬限制的砖墙效果。此外，TBPAClip 还在削波阶段之前提供了一个饱和器，用于温暖音频素材。

此外，还可以启用随机削波，通过向削波信号注入有色噪声来柔化硬削波引入的数字失真。

在音乐制作过程中使用 TBPAClip，您将受益于以下优势：
单频段/多频段饱和器/削波器集成于一个插件中
高级对称和非对称削波功能
削波前饱和（可选）
丰富的削波音调控制
随机削波
256 倍过采样，实现无混叠处理
音频速率参数调制

在单频段模式下，信号首先被送至饱和阶段，然后送至削波阶段。两者均可单独开启/关闭。削波阶段可工作于单削波或双削波模式。双削波模式为音频信号的正 (P) 和负 (N) 部分分别提供独立的上限和音调控制。

在多频段模式下，信号被分为三个频段。每个频段都有其独立的输入音量、输入电平表、饱和/削波阶段、混音控制和输出音量。组合后的信号随后被送至额外的音量控制和输出电平表。

饱和度
饱和度部分控制饱和度类型、驱动和反馈。如果驱动控制设置为关闭，则饱和度级将被旁路。

削波器
TBPAClip 为音频信号的正负两部分（双削波模式）提供独立的上限和音调控制，以及各种削波类型。

此外，还可以启用随机削波，通过向削波信号注入有色噪声来柔化硬削波引入的数字失真。

多频段
在多频段模式下，TBPAClip 提供 3 个频段，每个频段都有独立的输入、饱和度、削波和输出级。

滤波器斜率（24/48dB/倍频程）和相位模式（NP/LP）可切换。

峰值显示
峰值显示显示输入和输出信号，包括上限电平。

峰值显示可以有效地控制削波上限电平对信号的影响。

频谱显示
在多频段模式下，频谱显示提供频段电平和分频点的控制选项。

削波响应显示
削波响应显示提供对削波响应的全面控制。

当削波模式设置为“高级削波”时，可以对削波响应的形状进行大幅调整。

响度、饱和度和削波评分
响度信息页面显示 EBR128 的集成响度和瞬时最大响度值。

评分页面显示削波评分和饱和度评分。这些评分值是对饱和度和削波过程的量化衡量，有助于评估特定音调和驱动设置的性能。

功能：
单/多频段限幅器
单/双频段限幅器操作
6 种限幅类型
高级限幅响应
随机限幅
单/多频段饱和器
6 种饱和类型
多频段自然/线性相位滤波器
最高 256 倍过采样
灵活的增益级
饱和度和限幅评分
EBU R128 测量
中/侧处理
非操作系统最终限幅器
直流阻隔器
丰富的监听选项，例如中/侧、增量和单位增益
智能静音处理
参数 A/B 对比
音频速率参数调制
自由 GUI 缩放
————————————————————————————————————
原文：
TBPAClip—–Clipper and saturator
TBPAClip is a DAW plugin that offers extensive and flexible control over the clip process. The way the clipping is done is easily adjusted, like a soft-saturated or hard-limiting brick wall.
In addition, TBPAClip provides a saturator before the clipping stage to warm up the audio material.

TBPAClip is a DAW plugin that offers extensive and flexible control over the clip process. The way the clipping is done is easily adjusted, like a soft-saturated or hard-limiting brick wall. In addition, TBPAClip provides a saturator before the clipping stage to warm up the audio material.

Additionally stochastic clipping can be enabled to soften digital distortion, introduced by hard clipping by injecting colored noise to the clipped signal.

By using TBPAClip in your music production process you benefit from the following advantages:
single-band/multi-band saturator/clipper in one plugin
advanced symmetric and asymmetric clipping functions
saturation before clipping, both optional
extensive clip tone control
stochastic clipping
x256 oversampling for aliasing free processing
parameter modulation at audio rate

In single-band mode, the signal is first sent to the saturation stage and then to the clip stage. Both can be switched on/off individually. The clip stage can work either in single or dual clip mode. The dual clip mode provides individual ceil and tone controls for the positive (P) and negative (N) part of the audio signal.

In multi-band mode, the signal is divided into three bands. Each band has its own input volume, input level meter, saturation/clip stage, mix control, and output volume. The combined signal is then sent to an additional volume control and output level meter.

Saturation
The saturation section controls saturation type, drive and feedback. If the drive control is set to off, the saturation stage is bypassed.

Clipper
TBPAClip provides independent ceil and tone controls for the positive and negative part of the audio signal (dual clip mode) and various clip types.

Additionally stochastic clipping can be enabled to soften digital distortion, introduced by hard clipping by injecting colored noise to the clipped signal.

Multiband
In multiband mode TBPAClip provides 3 bands, each with an individual input, saturation, clip and output stage.

Filter slope (24/48dB/Oct) and phase mode (NP/LP) are switchable.

Peak display
The peak display shows the incoming and outgoing signal including ceil levels.

The peak display allows for efficient control of the effect of the clip ceiling level on the signal.

Spectrum display
In multiband mode the spectrum display provides controls for the band level and crossover frequencies.

Clip response display
The clip response display provides comprehensive control over the clip response.

When clip mode is set to ‘clip advanced’, the shape of the clip response can be extensively changed.

Loudness, saturation and clip score
The loudness information page shows the EBR128 Integrated and Momentary Max Loudness values.

The score page shows the clip and saturation scores. The score values are quantitative measures of the saturation and clipping process and help evaluate the performance of specific tone and drive settings.

Features:
single/multi band clipper
single/dual clipper operation
6 clip types
advanced clip response
stochstic clipping
single/multiband saturator
6 saturation types
multi-band natural/linear phase filter
up to x256 oversampling
flexible gain-staging
saturation and clip score
EBU R128 measurement
mid/side processing
non OS final clipper
DC blocker
extensive monitoring options like mid/side, delta and unity gain
smart silence processing
parameter A/B
parameter modulation at audio rate
free GUI scaling