PSPaudioware PSP preQursor3 v3.0.1_WIN-R2R

滤波器插件PSPaudioware PSP preQursor3
VST插件格式：
VST/VST3/AAX
翻译：
PSP preQursor3
PSP preQursor3 采用了 PSP 独特设计的滤波器，其低共振峰值可减少振铃伪影，衰减时具有出色的频带分离度和窄陷波。所有四个滤波器在增强时均为钟形滤波器，并具有渐进的 Q 值。

PSP preQursor3 引入了 PSP 的前置放大器和滤波器高级模拟建模技术，使插件的运行比之前的 PSP 均衡器仿真更加精确。模拟建模算法可以按实例或按实例组全局启用和控制。后者可以轻松控制混音中选定音轨或所有音轨的模拟处理量。

所有这些特性使得该处理器不仅在原声音轨、整体混音或任何其他应用中都能呈现出色的音质，还能让您通过简单便捷的控制为混音中的所有音轨虚拟创建输入控制台。在任何使用情况下，PSP preQursor3 都能保持素材的自然质感和清晰度。

全新 PSP preQursor3：
内置 31 频段分析仪
多阶 Q 值
重新设计的模拟仿真
更宽的频率范围

功能：
四段参数均衡：提升时低频和高频峰值 – 衰减时低频和高频倾斜
以及中低频和中高频峰值滤波带，
频率、Q 值和增益跟踪 Q 值可调。

高通滤波器。
均衡可应用于左、右、中、侧或两个输入通道。

FAT 双采样：在 PSP preQursor3 中，FAT 会在低采样率（低于 50 kHz）时自动开启，并在高采样率时关闭。这确保了无论采样率如何，都能实现精确的处理。

64 位双精度浮点运算，可实现滤波器中超低的累积误差——
无需再担心噪声累积或滤波器性能不切实际！

可选前置放大器和内置滤波器非线性仿真。

每个插件的输出端均可选配第二代 SAT（饱和度）选项。
这不仅可以防止插件后出现的软件或硬件数字削波，
还可以为硬驱动信号添加平滑的过载音色。SAT
算法位于插件内部链路的输出电平控制之后，
其最高参考电平设置为低于 0 dBFS 的几分之一 dB。

所有实际参数值（例如增益、频率或 Q 值）可能与显示值不同。
这是模拟均衡器的典型特征。

31 频段条形分析仪，可选配频谱曲线显示模式。
————————————————————————————————————
原文：
PSP preQursor3
PSP preQursor3 offers PSP’s uniquely designed filters with low resonance peaks for reduced ringing artifacts great band separation and narrow notching when attenuating. All four filters are bell-type filters when boosting and have progressive Q factors.

PSP preQursor3 introduces PSP’s Advanced Analog Modelling of preamplifier and filters to make the operation of the plug-in even more precise then previous PSP equalizer emulations. The analog modeling algorithm can be enabled and controlled per instance or globally per group of instances. The latter allows for easy control of the amount of analog-like processing on either selected tracks or all tracks in the mix.

All these characteristics result in a processor that not only sounds excellent on acoustic tracks overall mixes or any other application but also allows you to virtually create the input console for all tracks in your mix with easy and convenient controls. In every usage case PSP preQursor3 will maintain the natural feel and definition of the material.

The All-New PSP preQursor3 :
Built-in 31-band analyzer
Multi-step Q factor
Redesigned analog emulation
Wider frequency ranges

Features:
Four bands of parametric equalization: peaking Low and High on boost – shelving Low
and High on cut and peaking Low Mid and High Mid filter bands with adjustable,
frequency, Q, and gain-following Q values.

High Pass Filter.
Equalization can be applied to Left, Right, Mid, Side or to both input channels.

FAT double sampling: In PSP preQursor3 FAT is automatically switched on for low
(below 50 kHz) sample rates, and off for higher sample rates. This ensures accurate
processing independent of the sample rate.

64-bit double precision floating point math for ultra-low cumulative errors in the filters –
no more worrying about piling up noise or unrealistic filters’ behavior!

An optional preamp and in-filters nonlinearities emulation.

An optional second-generation SAT (for SATuration) option in the output of each plug-in.
This not only protects against digital clipping in software or hardware that comes after
the plug-in, but it also adds a smooth overdriven sound to hard-driven signals. The SAT
algorithm is located after the output level control in the plug-in’s internal chain, and its
ceiling reference level is set to a fraction of dB below 0 dBFS.

All actual parameter values like gain, frequency, or Q may differ from displayed values.
This is a typical feature of analog equalizers.

A 31-band bar analyzer with optional spectrum curve display mode.

VST619音频资源网收集整理！