Wavegrove Mariform v1.0.1_WIN-MOCHA

谐波失真插件Wavegrove Mariform
VST插件格式：
VST/VST3/AAX

Mariform 是一款将抗静电饱和处理与有机动态融合的音频插件。它通过定制变压器实现真实的谐波饱和，允许用户针对低、中、高频区域进行精确调节，并为声音添加自然的动态响应。

翻译：
Mariform——抗静电饱和与自然律动的完美融合。
驱动 – 调节谐波饱和的强度。
• 区域 – 选择目标频率范围：低频、中频或高频。
• 区域频谱控制 – 使用三个独立的饱和点微调每个频段。

阻抗 – 添加自然、动态的律动。
• 音色 – 跟随信号动态，实现自然的音色响应。
• 能量提升 – 引入额外的能量。

Mariform 由 Wavegrove 和 Tape Over 合作开发，融合了模拟变压器的特性和精心调校的谐波控制，带来自然、富有音乐性的响应。

Mariform 的核心是一个定制变压器，旨在提供逼真的变压器饱和效果。无论您追求的是微妙的温暖感，还是丰富、谐波复杂的驱动，Mariform 都能通过其律动、音色和特性，为您呈现真实的声音。

Mariform 适用于乐器、编组和混音总线。需要饱满的低频和丰富的谐波？没问题。吉他和镲片的刺耳尖峰？完全消除。平淡无奇的音轨？再也不用担心了。想要一些甜美复古的中频？就像奶奶亲手烘焙的一样。

更多功能：
• MariAir – 平滑的高频搁架式均衡器，提升空气感和开阔感。
• 削波器（前置/后置）– 选择在饱和处理之前或之后进行削波。
• 中/侧处理 – 对单声道或侧声道应用饱和处理，以控制深度或宽度。
• 高切和低切 – 将处理限制在所需的频率范围内。
• 校准 – 控制整体深度和阻抗响应。
• 输入和输出增益 – 调整增益级以获得最佳谐波驱动。
• 混合 – 混合干信号和处理后的信号。
• 立体声和 MS 平衡 – 优化立体声定位。
• 中/侧平衡 – 调整中频和侧频内容的比例。
• Delta 监测 – 试听差异信号，听听 Mariform 添加的内容。
————————————————————————————————————
原文：
Mariform—–Antistatic saturation meets organic movement.
Drive – Adjust the intensity of harmonic saturation.
• Area – Choose the target frequency zone: Low, Mid, or High.
• Area Spectrum Control – Fine-tune each range with three independent saturation points.

Impedance – Adds natural, dynamic movement.
• Tone – Follows signal dynamics for organic tonal response.
• Bump – Introduces extra energy.

Developed in collaboration between Wavegrove and Tape Over, Mariform fuses analog transformer behavior with carefully tuned harmonic control for an organic, musical response.

At the heart of Mariform lies a custom transformer, engineered to deliver realistic transformer saturation. Whether you’re aiming for subtle warmth or rich, harmonically complex drive, Mariform provides an authentic sound through its movement, tonality and character.

Mariform is made for instruments, groups and the mix bus. Need a huge low end with harmonics? Done. Nasty spikes from guitars and drum cymbals? No flux given. A flat sounding stem? Not anymore. Mid range needs some sweet old character? As if baked by your grandmother.

Further features:
• MariAir – A smooth high-frequency shelf EQ for air and openness.
• Clipper (Pre/Post) – Choose to clip before or after saturation.
• Mid/Side Processing – Apply saturation to mono or side channels for controlled depth or width.
• High Cut & Low Cut – Limit the processing to your desired frequency range.
• Calibration – Control the overall depth and impedance response.
• Input & Output Gain – Adjust gain staging for optimal harmonic drive.
• Blend – Mix between dry and processed signals.
• Stereo and MS Balance – Refine stereo placement.
• Mid/Side Balance – Adjust the relationship between mid and side content.
• Delta Monitoring – Audition the difference signal to hear what Mariform adds.

VST619音频资源网收集整理！