PSPaudioware PSP auralControl v1.3.0_WIN-R2R

母带处理插件PSPaudioware PSP auralControl
VST插件格式：
VST3/AAX
翻译：
PSP 听觉控制
身临其境

PSP auralControl是多通道跟踪、混音和母带制作的重要工具。其目的是单独调整多通道集中每个通道的电平、极性、带宽和定时。

PSP auralControl 预先定义了行业标准的多声道格式，具有分组功能，并能在单个屏幕上显示所有功能，因此在几乎所有环绕声项目中都能节省时间。无论是处理多声道现场干线的不平衡，解决多声道混响音轨的问题，不想限制 LFE 或天花扬声器的频谱内容，还是参照左右声道调整中央声道的时序和电平，PSP auralControl 都能为这些问题提供直接的解决方案。

我们设计这款插件就是为了让朋友们的生活更轻松。特别感谢 Thor Fienberg 和 Scott Michael Smith 在项目初期提供的创意、灵感和帮助。

典型用途
重新平衡多通道主干。

多通道总线的监听：每个通道都有峰值表，可以在多通道总线上对所需通道进行静音或独奏，例如检查多通道混响发送的 SIDE。

多通道母线的增益分级：您可以轻松控制每个通道的电平，例如提高效果发送的后部电平，降低低频电平。

简单的多通道操作：你可以直接使用每个通道的基本 HPF 和 LPF 滤波器–例如，使用 LPF 对 LFE 进行滚降，或使用 HPF 在 TOP 上只保留 “空气”。

高级效果操作：您可以访问延时部分，为多通道混音设置独特的深度–例如，您可以将 PSP 2445 的多单声道实例放在多通道混响发送上，创建一种 “大型单声道混响”。通过 PSP auralControl，您可以关闭低频，为前置、后置、侧置和顶部设置不同的频率范围和电平，并为每个通道组设置不同的预延时，以产生听起来完整的多通道混响。

高级电平骑乘：您可以使用通道组和相对或反向链接的录音自动化（反向链接–例如提高前声场电平，同时降低后声场电平）。

高级中间侧操作：可对立体声轨道进行中间侧处理。

功能特点
每个通道上都有带峰值表的电平控制推子。

可调延迟时间、高通和低通滤波器。

每个通道上都有静音和独奏按钮。

所有参数均可在预定义或自定义组中进行控制，或在多通道设置中对每个通道进行单独控制。

预定义的行业标准多声道格式，从双声道左右声道或中侧立体声到 7.1.4 声道

————————————————————————————————————
原文：
PSP auralControl
IMPRESSIVELY IMMERSIVE

PSP auralControl (AAX, VST3, AudioUnit) is an essential tool for multichannel tracking, mixing and mastering. Its aim is to individually adjust level, polarity, bandwidth and timing for each individual channel in the multichannel set.

Predefined industry standard multichannel formats, grouping capability, and displaying all features on a single screen makes the PSP auralControl a time saver in a virtually every surround project. Whether dealing with imbalances in the multichannel live stem, addressing problems with a multichannel reverb track, not wanting to limit the spectrum content of the LFE or ceiling speakers, or adjusting the center channel timing and level in reference to left and right – PSP auralControl offers a straight-forward solution to these problems.

We designed this plug-in to make our friends’ lives easier. Special thanks to Thor Fienberg and Scott Michael Smith for initial idea, inspiration and help from the beginning of the project.

Typical uses
Re-balancing multichannel stems.

Monitoring of multichannel buses: you have peak meters for each channel and can mute or solo desired channels on multichannel buses – for example to check SIDEs on a multichannel reverb send.

Gain staging for multichannel buses: you can control the level of each channel with ease – for example bring up REARs on effect sends, reduce LFE.

Simple multichannel operations: you have direct access to basic HPF and LPF filters for each channel – for example to roll-off LFE with LPF or to leave only “air” on TOPs with HPF.

Advanced effect operations: you have access to a Delay section to setup unique depths for multichannel mixes – for example you can put a multi-mono instance of PSP 2445 on a multichannel reverb send, creating a type of “big monophonic reverb.” With PSP auralControl you can roll off LFE, set different frequency ranges and levels for FRONTs, REARs, SIDEs and TOPs and set different pre-delays for each channel group to produce a full-sounding multichannel reverb.

Advanced level riding: you have access to channel groups and record automation with relative or reversed linking (reversed linking – for example bringing up FRONT levels while reducing REAR levels).

Advanced Mid-Side operations: you have access to Mid-Side processing of Stereo tracks.

Features
Level control faders with Peak Meters on each channel.

Adjustable Delay Time, High-Pass and Low-Pass Filters.

Mute and Solo buttons on each channel.

All parameters may be controlled in Predefined or Custom Groups, or Individually for each channel in the multichannel set.

Predefined industry standard multichannel formats from two-channel Left-Right or Mid-Side Stereo to 7.1.4

VST619音频资源网收集整理！