Apulsoft splitS v1.1.2_WIN-SEnki

人声混音插件Apulsoft splitS
VST插件格式：
VST3/AAX

Apulsoft splitS 是一款通过智能信号分离技术，将人声精准分为齿音与非齿音两部分，并允许独立调整其音量的创新型插件。它并非传统的消齿音插件，而是一个智能混音器。
Apulsoft splitS 是一款创新的齿音处理/人声混音插件。它通过独特的信号分离思路，提供了比传统消齿音插件更直观、更灵活的编辑和控制方式。

翻译：
splitS——并非齿音消除器
虽然齿音消除器和动态均衡器非常有用，但它们很少能够有效地管理人声录音中的齿音。

制作人和工程师通常都会花费大量时间手动编辑这些有问题的声音。虽然这种方法通常不可避免，但它非常耗时，并且会分散您对真正重要的事情的注意力。

splitS 可以帮您节省时间！
splitS 并非齿音消除器，而是一款简单的混音器，它可以让您平衡齿音，并在瞬间将人声轨道区分为齿音和非齿音。如果不改变音量，信号将保持原样，因为齿音和非齿音的切换是在全频信号上进行的。

无压缩、无均衡、无分频。

自 v1.1 版本起，S-Range 功能可以检测每个 S 事件的峰值电平，让您可以设置最大音量，或将软事件从 S 通道中排除。
splitS 由我们与瑞士混音师 Thomas “Mister T.” Gloor 密切合作开发。

主要功能：
先进的齿音检测功能，利用频谱亮度、电平和音高进行检测。
将信号拆分为两个全频分量：齿音和非齿音，方便直接在音轨上进行精确编辑。
在未应用增益变化的情况下，信号完整性可达 100%。
滚动波形图实时显示拆分和电平变化。
新功能：S-Range 允许设置 S-event 的最大和最小电平。
在 Pro Tools、Reaper、Live 和 Bitwig 中支持 NOS/S 信号的多输出。
典型延迟（取决于参数）：~30 毫秒
————————————————————————————————————
原文：
splitS—-is not a de-esser
While de-essers and dynamic EQs can be very useful, they are rarely sufficient for effectively managing sibilance in vocal recordings.

Producers and engineers alike commonly find themselves spending long hours manually editing these problematic sounds. While often unavoidable, this method is very time-consuming and diverts attention from what really matters.

splitS is here to give you your time back!
splitS is not a de-esser, but rather a straightforward mixer that allows you to balance sibilances, and separate a vocal track between sibilance and non-sibilance in a split of a second. The signal is left absolutely intact if no volume change is applied, as the cut between sibilance and non-sibilance is made on the full range signal.

No compression, no EQ, no crossover.

Since v1.1, the S-Range feature can detect the peak level of each S event, letting you set a maximum volume — or exclude soft events from the S channel.
splitS was developed in close collaboration with Swiss mixer Thomas “Mister T.” Gloor.

Main Features:
Advanced sibilance detection using spectral brightness, level, and pitch.
Splitting the signal into two full range components: sibilance and non-sibilance, allowing for precise editing directly on the audio track.
100% signal integrity if no gain change is applied.
Scrolling waveform display shows splitting and level changes in real time.
New: S‑Range allows setting maximum and minimum levels for S‑events.
Multi-out support for NOS/S signals in Pro Tools, Reaper, Live, and Bitwig.
Typical latency (parameter-dependent): ~30ms

VST619音频资源网收集整理！