Sonoris Mastering Compressor

压缩器插件Sonoris Mastering Compressor
VST插件格式：
VST/VST3/AAX

Sonoris Mastering Compressor是一款超纯净的宽频母带压缩器插件，支持VST/VST3/AAX格式。具备MS分频处理、8倍上采样等专业功能，适合精细的母带处理。

翻译：
Mastering Compressor
Sonoris 母带压缩器插件
Sonoris 母带压缩器是一款适用于 Windows 的宽带母带压缩器，支持 VST、VST3 和 AAX 格式。它是一款超干净的压缩器，尤其适合处理细腻的音频素材。

透明度
SMCP 不会像大多数压缩器那样产生奇次谐波失真。为了减少残留的失真，SMCP 提供高达 8 倍的音频上采样功能。选择自动释放和反馈检测，并配合两个柔和的拐点，可以进一步增强透明度。

特性
如果需要更强劲的压缩效果，可以选择前馈检测和更硬的拐点。如果使用过硬的拐点，它也能展现出独特的个性。如有需要，只需拨动开关，即可通过偶次谐波来温暖音频。

聚焦
除了处理整个混音之外，SMCP 还可以通过可变链接，在分离模式下处理 L、R、M 或 S 声道，或介于两者之间的任何通道。

灵活性
每个通道的侧链都可选配高通、带通和低通滤波器。这赋予了它极大的灵活性，并允许对音频进行创造性的增强。

功能：
超纯净的宽带母带压缩器
压缩和限制的压缩比范围从 1:1 到无穷大
启动时间范围从 0 毫秒到 1 秒
可选自动启动时间
释放时间范围从 1 毫秒到 5 秒
可选自动释放时间范围从 0.5 秒到 5 秒程序相关
阈值范围：-60 dBfs 至 0 dBfs
非常灵活的拐点设置，从硬拐点到软拐点，100 级可调
第二个拐点，使压缩器能够在阈值以上将压缩比调整回 1:1，同样可以 100 级调节，从硬拐点到软拐点
反馈和前馈检测器类型
可选高通、带通和低通侧链滤波器
可变：侧链链接可从完全链接调整到完全分离
最高链接：侧链与左右声道中的最高值链接
MS 分离：侧链信号与中声道和侧声道分离
补偿增益范围：-18 dB 至 +18 dB
2 倍、4 倍、8 倍或自动上采样，以减少失真
可选择输出端的柔和偶次谐波失真
并行压缩推子
A/B 对比
带有可拖动手柄的大型图形显示，实现最大程度的控制
可缩放的用户界面
增益传递图
高分辨率增益衰减表
高分辨率电平表可重置峰值指示器
可实现完全自动化
支持鼠标滚轮
设置可保存和加载
双倍精度内部分辨率，并可与兼容的 DAW 软件连接
————————————————————————————————————
原文：
Mastering Compressor
The Sonoris Mastering Compressor
The Sonoris Mastering Compressor is a wideband mastering compressor in VST, VST3, and AAX format for Windows . It is an ultra clean compressor suitable for delicate material.

Transparency
No odd harmonic distortion that can be found in most compressors, is present in the SMCP. To reduce residual artifacts, the SMCP features upsampling of the audio up to 8 times. Transparency can be further enhanced by selecting auto-release and feedback detection together with two soft knees.

Character
If a more aggressive behavior is needed, you can choose feedforward detection with a harder knee. It can have some character if pushed. If needed, the audio can be warmed up by even harmonics with the flip of a switch.

Focus
Besides working on a full mix, the SMCP can also work in split mode on the individual L, R, M or S channels or anything in between, with the variable link.

Flexibility
The sidechain for each channel has a selectable high-pass, band-pass and low-pass filter. This gives great flexibility and allows for creative enhancement of the audio.

Features:
Ultra clean wideband mastering compressor
Ratio ranging from 1:1 to infinity for compression and limiting
Attack ranging from 0 msec to 1 sec
Selectable auto-attack
Release ranging from 1 msec to 5 sec
Selectable auto-release ranging from 0.5 sec. to 5 sec. program dependent
Threshold ranging from -60 dBfs to 0 dBfs
Very flexible knee setting from hard to soft in 100 steps
A second knee that enables the compressor to adjust the ratio back to 1:1 above the threshold, also adjustable in 100 steps from hard to soft knee
Feedback and feedforward detector types
Selectable high-pass, band-pass and low-pass sidechain filters
Variable: sidechain linking is adjustable from fully linked to fully split
Highest Link: sidechains linked with the highest value of the left and right channel
MS Split: sidechain signals split with the mid and side channels
Make up gain ranging from -18 dB to +18 dB
2x, 4x, 8x or auto upsampling for even less artifacts
Selectable gentle even harmonic distortion on the output
Parallel compression fader
A/B comparison
Large graphical display with dragable handles for maximum control
Scalable user interface
Gain transfer plot
High resolution gain reduction meter
High resolution level meter with resettable peak indicator
Full automation possible
Mousewheel support
Settings can be saved and loaded
Double precision internal resolution and interfacing with compatible DAWs