Sonoris Multiband Compressor

压缩器插件Sonoris Multiband Compressor
VST插件格式：
VST/VST3/AAX

Sonoris Multiband Compressor是一款超纯净的三频段母带压缩器插件，支持VST/VST3/AAX格式。具备线性相位分频和MS分频处理，适合精细的多段动态控制。

翻译：
Multiband Compressor
Sonoris 多频段压缩器插件
Sonoris 多频段压缩器是一款功能强大的三频段压缩器，支持 VST、VST3 和 AAX 格式，适用于 Windows 系统。它是一款超纯净的处理器，尤其适合处理细腻的素材。

三个独立的频段
Sonoris 多频段压缩器拥有三个独立的频段，每个频段都配备了一个基于 Sonoris 母带压缩器的压缩器。这三个频段均采用精心设计的 Linkwitz-Riley 分频滤波器，以避免相位抵消问题，同时保持非常自然、模拟般的音质。它们的设计使其能够平直地混音，并且使用起来非常高效。分频滤波器还可以工作在线性相位模式下。在此模式下，不会产生任何音染，并且能够尽可能地保留波形，但会略微增加延迟。

精准定位
除了处理整个混音之外，每个滤波器频段还可以通过可变链接分别处理左声道、右声道、中声道、侧声道或介于两者之间的任何声道。此功能使 SMBC 成为强大的问题解决工具，让您能够专门针对混音中的特定问题进行处理。例如，在保持混音完整性的前提下，抑制中置通道的低音或左声道中 3kHz 的军鼓敲击声。

功能：
极其纯净的三段式母带压缩器
可选相位校正 Linkwitz-Riley 或线性相位分频滤波器
压缩和限制的比率范围从 1:1 到无穷大
启动时间范围从瞬时 (0 微秒) 到 1 秒
可选自动启动
释放时间范围从 1 毫秒到 5 秒
可选自动释放时间范围从 0.5 秒到 5 秒程序相关
阈值范围：-60 dBfs 至 0 dBfs
非常灵活的拐点设置，从硬拐点到软拐点，100 级可调
第二个拐点，使压缩器能够在阈值以上将压缩比调整回 1:1，同样可以 100 级调节，从硬拐点到软拐点
反馈和前馈检测器类型
可变链接：侧链链接可从完全链接调整到完全分离
最高链接：侧链链接左右声道中的最高值
对立体声、左声道、右声道、中声道或侧声道进行压缩
频段独奏模式
监听可在立体声、左声道、右声道、中声道或侧声道之间选择
补偿增益范围：-18 dB 至 +18 dB
2 倍、4 倍、8 倍或自动上采样，以减少失真
A/B 对比
可缩放的用户界面
增益传递曲线图
高分辨率增益衰减表
带可复位峰值指示器的高分辨率电平表
可实现完全自动化
支持鼠标滚轮
设置可以保存和已加载
双精度内部分辨率，并可与兼容的 DAW 连接
————————————————————————————————————
原文：
Multiband Compressor
The Sonoris Multiband Compressor
The Sonoris Multiband Compressor is a versatile three band compressor in VST, VST3, and AAX format for Windows. It is an ultra clean processor, suitable for delicate material.

Three independent frequency bands
The Sonoris Multiband Compressor has three independent frequency bands, each followed by a compressor based on the Sonoris Mastering Compressor. The three bands are created with carefully designed Linkwitz-Riley crossover filters to avoid phase cancellation problems while having a very natural, analog like quality. By design they mix back flat and are efficient in use. The crossover filter can also work in linear phase mode. In this mode there is no coloration and the wave shape is preserved as much as possible at the expense of a small delay.

Focuses on where it is needed
Besides working on a full mix, each filter band can also work on the Left, Right, Mid or Side channels or anything in between, with the variable link. This feature turns the SMBC into a powerful problem solver enabling you to exclusively attack a specific problem in a mix. For example, taming the bass in the Mid channel or a snare hit in the Left channel at 3KHz while keeping the integrity of the mix intact.

Features:
Extremely clean three band mastering compressor
Selectable phase correct Linkwitz-Riley or linear phase crossover filters
Ratio ranging from 1:1 to infinity for compression and limiting
Attack ranging from instantaneously (0 usec.) to 1 sec
Selectable auto-attack
Release ranging from 1 msec to 5 sec
Selectable auto-release ranging from 0.5 sec. to 5 sec. program dependent
Threshold ranging from -60 dBfs to 0 dBfs
Very flexible knee setting from hard to soft in 100 steps
A second knee that enables the compressor to adjust the ratio back to 1:1 above the threshold, also adjustable in 100 steps from hard to soft knee
Feedback and feedforward detector types
Variable Link: sidechain linking is adjustable from fully linked to fully split
Highest Link: sidechains linked with the highest value of the left and right channel
Compression on stereo, L, R, Mid or Side channels
Band solo modes
Monitoring selectable between stereo, L, R, Mid or Side channels
Make up gain ranging from -18 dB to +18 dB
2x, 4x, 8x or auto upsampling for even less artifacts
A/B comparison
Scalable user interface
Gain transfer plot
High resolution gain reduction meters
High resolution level meters with resettable peak indicator
Full automation possible
Mousewheel support
Settings can be saved and loaded
Double precision internal resolution and interfacing with compatible DAWs